News
NEWS
What are the characteristics of electrical connector pins
Electrical connector pins, the main function of the connector pins is to interconnect with related equipment, so the connector pins are very critical. In order to keep the pins strong and stable, what method should be used
Electrical Connector Pins, The main function of the connector pin is to interconnect with related equipment, so the connector pin is very critical. In order to keep the pin strong and stable, what method should be used? There are three main methods for electrical connector pins to press in connector pins: forced press-in to fix the pins.
1、Electrical Connector PinsThe pin installation is simple, the insulated wire is not peeled off, ensuring a good electrical connection and not damaging the wire.
2, if there is no cable back line, save cable investment.
3, do not need to cut off the main cable, can be in the cable can be any position of the tap.
4, low cost, the space is very small.
5, the joint is completely different insulation, without stripping the insulation of the cable can be done cable enterprise branch.
2 Electrical Connector PinsEpoxy type: After the insulator and housing are perforated, the pins are fixed with epoxy resin.
1. Strong chemical resistance, acid resistance, alkali resistance and organic solvent resistance.
2. The molding shrinkage rate is low, the dimensional stability is good, and the possibility of cracking is low.
3,The mechanical system performance and heat resistance are excellent.
4. High bonding strength, especially suitable for products and coil inserts, molded tube shell electronic devices.
5、Electrical Connector PinsExcellent electrical properties, can be used as high-frequency and high-voltage insulating structural materials, arc resistance and surface leakage resistance than the general use of insulating technology materials.
3.Electrical Connector PinsPin point riveting: After crimping, point riveting the housing to fix the pin.
1, simple structure, high reliability, is a cost-effective method of permanent use of fixed production assembly.
2. The metal parts are assembled firmly, tightly and stably, with high impact resistance, corrosion resistance, weather resistance and impact.
3. The processing and production process has no vibration, no pollution, no noise, environmental protection, energy saving, fast, efficient, high quality and beautiful.
4. Multi-point fixed by riveting, without adding any adhesives, solvents, fillers and fasteners, low energy consumption, compact equipment, and small footprint.
Key words:
Related News