News
NEWS
What is the connection mode of waterproof aviation plug
Waterproof aviation plug connection has brought great help to production in life. What is the connection method of waterproof aviation plug
Waterproof aviation plugConnection has brought great help to production in life. What is the connection method of waterproof aviation plug.
1、Waterproof aviation plugInstallation method and shape: the aviation plug is installed with front and rear installation, and the installation and fixing methods include rivets, screws, snap rings or the aviation plug itself clamp pin quick lock, etc. There is also a plug and socket are free end aviation plug, relay aviation plug.
2、Waterproof aviation plugWhat is the connection mode, aviation socket terminal: The termination device is used to contact the wire or cable air plug connection. Termination is reasonable in the choice and proper use of termination technology, but also an important aspect of aviation plug use and selection.
32. Waterproof aviation plugWhat is the connection mode, aviation socket welding: The most common welding technology is soldering. The most important thing in soldering connection is that a metal continuity should be formed between the solder material and the surface of the welded material. Weldability is therefore important for aerospace through plug design. The most common coatings for soldering ends of aeronautical measurement plugs are tin alloys, silver and gold. Reed type learning contact has solder plate type, piercing solder plate type and notched solder plate type for common welding ends: pin-hole type contact adopts arc partial notch type for common welding ends and drilling holes.
42. Waterproof aviation plugWhat is the connection mode, aviation socket crimpingCrimping is the technique of metal wire and the compression and displacement of the contact within a specified range. A good crimp connection produces intermetallic melt flow, symmetrical deformation of the welding wire and contact material. This connection is similar to cold welded connections can get good mechanical strength and electrical continuity, it can withstand harsh environmental conditions, more generally, the correct crimp connection is better than brazing, must be specially used in the case of high current, crimp. During crimping pliers or automatic, semi-automatic crimping machine should be dedicated to the pressure. The cross-section of the wire should be the correct choice for the contact wire barrel. Please note that the crimp connection is connected and it can only be used once.
Key words:
Related News