News
NEWS
Analysis of four-pin four-hole aviation plug
When actually operating the four-pin four-hole aviation plug in order to ensure its actual operation is proper, it is necessary to fully grasp and understand its operation steps. Some four-pin four-hole aviation plugs do not have the ability to prevent operation errors. In order to ensure accurate positioning and proper positioning during connection, it is also possible to match the model and specification before connection. In order to avoid external electrical contact caused by damage to the four-pin four-hole aviation plug, attention should be paid to avoid misinsertion of the pin power socket.
The actual operation of four-pin four-holeaviation plugIn order to ensure proper actual operation, we must first fully grasp and understand the operation steps. Some four-pin four-hole aviation plugs do not have anti-operation errors. In order to ensure accurate positioning and proper connection, we can also match the model specifications before connection. In order to avoid external electrical contact caused by damage of four-pin four-hole aviation plugs, we must pay attention to avoid misinsertion of power sockets with pins.
It is also necessary to ensure that the four-pin four-hole aviation plug is connected in time, especially in some unique places that are not easy to be inspected, and detailed requirements should be made in the relative safety operation procedures, and inspection should be carried out according to the scope. When the four-pin four-hole aviation plug is terminated, the relative termination standards or regulations should be strictly implemented to carry out termination and inspection, and the termination should be carried out according to the matching connection point number, the thickness of the larger cable sheath between the used cable transmission lines shall be matched with the contact spacing, and the cable core shall be matched with the routing end of the contact.
When carrying out electric welding of the contact, the selection of the relative output power of the electric chromium iron should be based on the spiral diameter. During electric welding, the electric welding time of each contact shall not exceed 5 seconds. In order to prevent the grounding resistance of the product from decreasing, it should be noted that the flux does not penetrate into the conductor and insulator.
Four-pin four-holeaviation plugApplication
Imagine if there were no four needles and four holesaviation plugWhat would it be? At this point the power circuits have to be permanently connected together with continuous electrical conductors. For example, if the electronic system is to be connected to the switching power supply, it is necessary to connect both sides of the connecting power transmission line to the electronic system and the switching power supply in a fixed manner.
In this way, no matter for manufacturing or application, there are a lot of trouble, take the car battery as an example. Assuming that the battery cable is fixed and welded to the battery, the car manufacturer increases the labor, manufacturing time and cost for installing the battery.
When the battery must be disassembled and replaced, the car must also be sent to the maintenance center for poor contact. The old one must be disassembled and the new one must be welded. Therefore, more labor is required. Having a four-pin four-hole aviation plug can avoid a lot of inconvenience. Buy a new battery from the store, break the four-pin four-hole aviation plug, disassemble the old battery, install the battery on the shelf, and connect it again.aviation plugJust do it.
This simple example shows the benefits of the four-pin four-hole aviation plug, which makes the design and processing process more convenient and convenient, and reduces the cost of manufacturing and maintenance.
Key words:
Related News